 
The 303 GeoTrip is a precise tripmeter showing
distance, speed, average speed, timing, regularity target times(regularity
target timing with optional display). GPS & GLONASS tracks upto 48 satellites
simultaneously, this can give extremely high accuracy typically
0.17% of distance driven. The GeoTrip GPS/GLONASS is far more accurate
than the GPS inside a smartphone or most car SatNav devices.
Installation is simple with our bracket, either suction to the
windscreen or bolt to the vehicle, then connect to the cars
12 volt supply. No more installation is required, but if you
require a mechanical probe,you can also connect 1 or 2 in addition.
If you connect a probe, then you have the added feature of probe
fallback - if satellite signal is lost due to a tunnel or similar,
then the probe will automatically take over. If no mechanical
probe and satellite signal is lost, then the unit will estimate the
distance travelled when signal is re-gained.
New features include performance timing, which shows acceleration
and deceleration 0-60, 0-100, 0-xx (custom speed). Performance
timing stores 8 results, and you can view in real time. An optional
remote display (Part No. T016G) can be fitted and this will
show Interval Distance, Speed or Average Speed. The remote display
also has 7 LED indicators, these are used on regularity rallies
and show the driver how far ahead or behind of the target speed
in seconds. Optional remote zeroing unit is available by either
foot remote or handheld remote.
|